Prof. Dr.-Ing. Hans-Joachim Schmid
Faculty of Mechanical Engineering
Section Owner - Employee - Studiendekan
Key research area Sustainable Materials, Processes and Products
Head of Institute - Professor - Chairman of the Paderborn Institute for Additive Fabrication (PIAF)
Partikelverfahrenstechnik (PVT)
Section Owner - Professor - Full Professor
Direct Manufacturing Research Center (DMRC) (until 2022)
Head - Professor - Scientific Director
Direct Manufacturing Research Center (DMRC) - Academic
Professor - Chairman
Institute for Lightweight Design with Hybrid Systems
Member - Professor - Vorstand FK LEM
33098 Paderborn
Miscellaneous |
|
Since 01.06.2008 |
Scientific Director of "Direct Manufacturing Research Center" at University of Paderborn |
Since 01.10.2006 |
Chair of Particle Technology at University of Paderborn |
15.01.2005 - 30.09.2006 |
Permanent scientist at Chair of Solids and Interface Process Engineering at University of Erlangen-Nuremberg |
15.06.1999 - 14.01.2005 |
Scientist at Chair of Solids and Interface Process Engineering (Prof. Wolfgang Peukert) at TU Munich and University of Erlangen-Nuremberg (as of 15.10.2003) |
02.06.1993 - 14.06.1999 |
Scientific Assistant at Institute of Mechanical Process Engineering and Mechanics at University of Karlsruhe (Germany) |
19.12.1998 |
Obtaining doctorate from University of Karlsruhe (Germany) Title of PhD thesis: On Particle Transport in Electrostatic Precipitators (summa cum laude) |
01.10.2018 - 01.06.1993 |
Studying Chemical Engineering at University Fridericiana at Karlsruhe (Germany) graduated with 'Dipl.-Ing.' |
22.01.1967 |
born in Waiblingen (Germany) |
Since 01.06.2008 |
Scientific Director of "Direct Manufacturing Research Center" at University of Paderborn |
Since 01.10.2006 |
Chair of Particle Technology at University of Paderborn |
15.01.2005 - 30.09.2006 |
Permanent scientist at Chair of Solids and Interface Process Engineering at University of Erlangen-Nuremberg |
15.06.1999 - 14.01.2005 |
Scientist at Chair of Solids and Interface Process Engineering (Prof. Wolfgang Peukert) at TU Munich and University of Erlangen-Nuremberg (as of 15.10.2003) |
02.06.1993 - 14.06.1999 |
Scientific Assistant at Institute of Mechanical Process Engineering and Mechanics at University of Karlsruhe (Germany) |
19.12.1998 |
Obtaining doctorate from University of Karlsruhe (Germany) Title of PhD thesis: On Particle Transport in Electrostatic Precipitators (summa cum laude) |
01.10.2018 - 01.06.1993 |
Studying Chemical Engineering at University Fridericiana at Karlsruhe (Germany) graduated with 'Dipl.-Ing.' |
22.01.1967 |
born in Waiblingen (Germany) |
Publications
Latest Publications
R. Tischendorf, O. Massopo, H.-J. Schmid, O. Pyrmak, S. Dupont, F. Fr?de, H. Pitsch, R. Kneer, eds., Maghemite Nanoparticles Synthesis via Spray Flame Synthesis and Particle Characterization by Hole in a Tube Sampling and Scanning Mobility Particle Sizing (HIAT-SMPS), Elsevier, 2024.
J. Beimdiek, H.-J. Schmid, Atmosphere (2024).
J. Beimdiek, H.-J. Schmid, Atmosphere 15 (2024).
M. Neuk?tter, S. Jesinghausen, H.-J. Schmid, in: 2023.
S. Josch, S. Jesinghausen, C. Dechert, H.-J. Schmid, Rheologica Acta (2023).